Loading... Please wait...

Categories

HiPoTek High Performance Conversion Polyurethane Motor Mounts LA Small Block 318/340/360 Fits Dakota RWD 1987-1996

  • Image 1
  • Image 2
  • OEM Motor Mount Frame Perches V6 and V8 (Not Supplied)
  • Driver's side, measure distance from the rear of the block to the threaded hole by the pan rail.
  • Driver's side, measure distance from the rear of the block to the threaded hole by the pan rail.
Price:
$299.95
SKU:
HPT365
Quantity:


Product Description

These HiPoTek polyurethane conversion motor mounts will allow you to run the LA small block 318/340/360 in the 1987-1996 Dakota RWD. You may also require the HiPoTek crank sensor adapter to retain the EFI (Electronic Fuel Injection) set-up for your vehicle: http://stores.hi-potek.com/hipotek-crank-sensor-adapter-dodge-jeep-3-9-5-2-5-9-magnum-efi-mpi/

Requires the use of the OEM V6 (3.9) or OEM V8 (5.2) motor mount frame perches sourced elsewhere (salvage yard).

They are designed for street, street/strip, and strip applications.  It is a performance motor mount that is soft enough for the street, but stout enough for high horsepower racing applications at the track. Powder coated black. Plated inner sleeve. For rear wheel drive (RWD/2WD) vehicles.

Please note: that on the driver’s side of the LA engine, you must measure the distance between the motor mount ears to be sure you get the correct driver’s side motor mount for your application. There was some variation through years. The spread of the driver’s side motor mount ears will either be 2 1/2” or 2 7/8”.   The photo above shows the measurement of the 2 1/2" spread, measured from the rear edge of each ear.

In addition: on the driver’s side of the block, there is a bolt hole close to the pan rail. Measure from the back of the block (where the bellhousing sits against) to the center of that hole. The distance will either be 9”, or 10”.

Find Similar Products by Category