S-Bolt For Dodge OEM 3.9 V6 and 5.2/5.9 V8 Throttle Body--SHIPPING INCLUDED S-Bolt For Dodge OEM 3.9 V6 and 5.2/5.9 V8 Throttle Body. This will allow the installation of an air cleaner with a center stud mount. May work with other throttle bodies with the same height. Comes with nut in which to lock the s-bolt in place.
An engine torque strap prevents unwanted side-to-side movement of the engine due to the extra load from aggressive driving, racing, and higher horsepower applications. It can prevent broken motor mounts and is able to handle upgraded power and excessive vibration. This torque strap is a step above the use of chains, cable…and nylon straps.
An engine torque strap prevents unwanted side-to-side movement of the engine due to the extra load from aggressive driving, racing, and higher horsepower applications. It can prevent broken motor mounts and is able to handle upgraded power and excessive vibration. This torque strap is a step above the use of chains, cable…and nylon straps.
Included is the HiPoTek MSD Blaster SS coil bracket (CB1) and the HiPoTek MSD 6A and 6AL ignition box mounting bracket (IB1).
The coil bracket fits the Dodge Magnum engine 3.9/5.2/5.9.This is a two piece unit that mounts using the OEM coil bolts.It includes a heat shield to protect the coil from excessive header heat.This was designed around a 1997-2003 Dakota but may fit the Durango, Jeep, or Ram with a 3.9/5.2/5.9 Magnum engine also.
This mounting bracket allows the MSD 6A/6AL ignition box to be mounted in the 1997-2003 Dakota engine compartment.It does not interfere with the mounting of the K&N Fuel Injected Cold Air Intake (CAI).
Does not include the coil (MSD 8207).Does not include the MSD ignition box not included [6425 (formerly6420) and 6201 (formerly 6200)].And does not include the MSD vibration mounts 8823.
Note: For orders other than the continental USA, additional shipping may be added.Contact Richard@hi-potek.com for details.
This mounting bracket allows the MSD 6A/6AL ignition box to be mounted in the 1997-2003 Dakota engine compartment.It does not interfere with the mounting of the K&N Fuel Injected Cold Air Intake (CAI).
MSD ignition box not included [6425 (formerly6420) and 6201 (formerly 6200)]
MSD vibration mounts 8823 will also be required and are not included.
Note: For orders other than the continental USA, additional shipping may be added.Contact Richard@hi-potek.com for details.
For Dodge Magnum engine 3.9/5.2/5.9.This is a two piece unit that mounts using the OEM coil bolts.It includes a heat shield to protect the coil from excessive header heat.This was designed around a 1997-2003 Dakota but may fit the Durango, Jeep, or Ram with a 3.9/5.2/5.9 Magnum engine also.
Does not include the coil (MSD 8207)
Note: For orders other than the continental USA, additional shipping may be added.Contact Richard@hi-potek.com for details.
The 1997-2003 Dakota 5.2/5.9 polyurethane motor mount is designed for street, street/strip, and strip applications.It is a performance motor mount that is soft enough for the street, but stout enough for high HP racing applications at the track. Powder coated black. Plated inner sleeve. Grade-8 fasteners included. For rear wheel drive.
The 1997-2003 Dakota 5.2/5.9 solid motor mount is designed for street/strip and strip applications.It is a performance motor mount that provides a solid connection between the engine and the frame, for high HP racing applications at the track, or hardcore street applications. Powder coated black. Grade-8 fasteners included. For rear wheel drive.
The 50mm throttle body is recommended for Dodge 5.2/5.9 stock or towing.Better performance throughout the entire rpm range. Also great for a modified 3.9L V6.
The 52mm throttle body is recommended for the Dodge 5.2 modified and 5.9 mild to modified with camshaft and head upgrades, performance intake, etc.Works well with light to moderate boost.Also 390/408 stroker towing.A good balance between low end torque and high rpm power with great midrange.A good street/strip throttle body
The 53mm throttle body is recommended for highly modified Dodge 5.9 or 390/408 stroker with higher performance camshaft, ported big valve heads, performance intake…or with boost.Really produces great midrange and high rpm power.No problem with lower rpm torque providing your combination is set up correctly with gear and stall convertor. A great racing throttle body.
The 68.5mm throttle body is recommended for Dodge 4.7 stock, towing, or moderate engine modifications. Better performance throughout the entire rpm range.
The 68.5mm throttle body is recommended for Dodge 4.7 stock, towing, or moderate engine modifications. Better performance throughout the entire rpm range.
The 68.5mm throttle body is recommended for Dodge 4.7 stock, towing, or moderate engine modifications. Better performance throughout the entire rpm range.
The 70mm throttle body is recommended for Dodge 4.7 with moderate to extensive engine modifications. Better performance throughout the entire rpm range.
The 70mm throttle body is recommended for Dodge 4.7 with moderate to extensive engine modifications. Better performance throughout the entire rpm range.
BBK 52mm throttle body fits all Ram, Durango, Dakota, and Jeep Models. All BBK Dodge Truck, Jeep throttle bodies are designed to increase airflow and improve horsepower from between 7-12 HP depending on vehicle and application. Extensive testing has shown very real gains in overall performance – which is even more noticeable on the heavier 4X4 models.All throttle bodies are direct replacements and include new gaskets and detailed installation instructions.
BBK 70 mm throttle body fits all 4.7 Ram, Durango, Dakota, and Jeep Models. All BBK Dodge Truck, Jeep throttle bodies are designed to increase airflow and improve horsepower from between 7-12 HP depending on vehicle and application. Extensive testing has shown very real gains in overall performance – which is even more noticeable on the heavier 4X4 models.All throttle bodies are direct replacements and include new gaskets and detailed installation instructions.
Note: This throttle body will only fit the 4.7 that utilizes the J-Tek PCM that is identified by the three PCM plugs.If the PCM has 4 plugs, it is an NGC PCM and it will not fit.
PRICE: $304.95
S-Bolt For Dodge OEM 3.9 V6 and 5.2/5.9 V8 Throttle Body--SHIPPING INCLUDED S-Bolt For Dodge OEM 3.9 V6 and 5.2/5.9 V8 Throttle Body. This will allow the installation of an air cleaner with a center stud mount. May work with other throttle bodies with the same height. Comes with nut in which to lock the s-bolt in place.
Fasten your throttle body to your intake manifold with these streamlined throttle body button head bolts for the 3.9/5.2/5.9 magnum engines.Low profile and rounded head reduces resistance to flow.Fits most throttle bodies.
For orders other than the continental USA, additional shipping may be added.Contact Richard@hi-potek.com for details.
.JPG)
_thumb.jpg)
